TuneUp 2013 FULL + working Keygen + Alternate Torrent Download Link!

TuneUp Utilities 2013 v13.0.3020.7 With Serial Keygen

(100% Working And Tested)+ Alternative Torrent Link!  

TuneUp Utilities 2013 provides you with a complete toolbox for optimizing Windows. Clearly structured tools in six categories get the best out of your PC. The tools are easy to use and intuitive. Professional assistance for your Windows PC. 

Improve your system's performance, thoroughly clean up your hard drives, solve your PC problems with a few clicks, and customize windows to your personal requirements. All in one program, simple and intuitive - TuneUp Utilities 2013. 

I have brought you 100% tested downloads of Tuneup Utilities 2013. I tested them myself. 

There are two different download links:

1. Direct Download Link from Filemanager (this one has keygen) [EXPIRED LINK]

2. Download via. Torrent with thepiratebay (cracked version) [EXPIRED LINK]

*Remember: Internet should be DISCONNECTED while doing the setup.
Two alternate files are being uploaded on my Dropbox. They will be available soon.

Fundamental reasons for using  TuneUp Utilities 2013 

* Powerful hard drive defragmentation

* Optimum start-up, Internet, and Windows acceleration

* Quick and extensive clean-up for hard drives

* Effective elimination of junk data

* Fully-automatic clean-up and improvement of your PC

* Extensive clean-up of the registry

* Effective help in solving standard Windows problems

* Secure data recovery and data elimination

* Simple custom Windows configuration

* Individual Windows styling 

* Optimum start-up, Internet, and Windows acceleration

* Quick and extensive clean-up for hard drives

* Effective elimination of junk data

* Fully-automatic clean-up and improvement of your PC

* Extensive clean-up of the registry

* Effective help in solving standard Windows problems

* Secure data recovery and data elimination

* Simple custom Windows configuration

* Individual Windows styling

Fast, Effective Windows Optimization

* One-click overview of your PC performance

* Quick analysis of your PC’s hardware, operating system, and programs

* Real performance increases, real fast

* Easy-to-understand help functions

Safe Windows Optimization

* Provides you with safe and effective optimization results

* Corrects all mistakes created from previous tuning attempts

* Comprehensive and easy rollback ability for any changes made to your PC

Intelligent Windows Optimization Built in for Every PC

* Intelligent recommendations for your unique PC optimization

* Identifies your personal settings and protects them

* Highlights your PC’s optimization potential, including unused programs and resource-draining settings

* Recommends options and explains performance results before taking any action

Perfectly Designed for Your Windows Operating System

* Automatically detects and configures for your operating system

* Ideal for XP, Vista nad Win7 (32/64 bit) users

* Designed to leverage the unique features within each operating system

Compatible with: Windows XP  , Vista and Windows 7 ( 32 and 64 bits )

---

DOWNLOADS:

 Direct Download Button:          Download via. Torrent:

                                         

Still having Problems?

If you still have problems,

view screenshots and follow instructions by clicking here!

COMMENTS:

Read more ...

CPU makes a strange noise? Read this & follow steps to solve it!

If the fan on the central processing unit (CPU) makes a lot of noise, there are things you can do to try to quiet it down a bit. While some noise may be normal and unavoidable, it should only be a low hum as the fan turns without anything disrupting it. A 'tick' sound or a 'clutter' sound or 'vibrating' sound could be made with a moving hardware part of the computer such as the CPU FAN.

An excessively noisy fan can be caused by dust, a loose fan, obstructions or a fan that is dying. 

Note these steps to help fix this

Instructions:

1. • 1
     Using a small screwdriver, remove the screws holding on the CPU cover from the chasis. Depending on the computer's CPU, there will be four to six screws along the outside of the case. Remove the cover and clean all dust from the fan and surrounding area.
   • 2
     Run the computer while the chasis is open & assure that the fan spins properly without any obstructions. If there are any wires that potentially get in the way, move them to the side and observe.
   • 3
     Tighten the screws that hold down the fan. If these are loose, the fan could be moving and making noise. (This happens generally)
   • 4
     Replace the fan. If it is determined that there's no outlying problem, the fan is bad and needs to be replaced.

How this happens? What should I do now?

The CPU Fan problem can be caused by something as normal as jerking the CPU. People generally do this when their devices stop working. Jerking a CPU may cause the CPU Fan to dislodge. Over some time, the dislodged CPU Fan can become permanently damaged. So, it is better to replace your CPU fan if all the steps given above fails. CPU Fan is comparatively an inexpensive device. But if you neglect it's problems for too long, it can cause heating and damage to the internal parts of the computer which will be VERY expensive to repair or replace.

Still having problems? Drop a comment below, I will look into it -- for FREE as always! ^_^
If this post was useful to you please, share it. Thanks!

COMMENTS:

Read more ...

Own a blog? Learn to make money with it!

[Link: Click me to know, 100% pure scam sites. See a list of scams that your should never waste your time with, by clicking here!]

---

If you want to earn money  online, these are the viable options. No Registration FEE. This is PURELY legit. 

• Google Adsense - Definitely most legit paysite hosted by google itself. Unfortunately, it has so many members that organizing them is difficult so Google observes your page first. It can pay upto $2/ad click  (depending upon the country u r in - For US and UK citizens its a jackpot!). Sadly for us Asians, we have to make a website/blog and it should be atleast 6 months old with over 1000 unique views! Even I have not had the opportunity to earn by this method, only because my blog is not old enough (I started blogging on May 30th 2013, recently!) Though I have a very good amount of page views! Most bloggers dont get these high views easily. Its all thanks to you. On 6/18/2013 this page has been viewed 782 times. You can see  how many times this has been viewed on the right side pane of this page!

• Clixsense- Another 100% legit site. Payrate seems lousy - $0.01 per ad click , but registration is hassle free and 100% safe with https. Also they have tons of other lucrative offers which you can complete to earn money. 
  Its like playing a game -  one that earns money, lol. 
  Click here to check out Clicksense! Registration is FREE , so I suggest you guys might as well try out for a few days. You don't even need a blog for this one. You can earn even with Facebook. Isn't that cool?

• Qadabra - If you have a blog like mine, you can start earning with Qadabra. Its registration is hassle free too! But you cannot control the type of ads they post, its random. I started this a while ago. But quickly fed up with it. You can try it though. Its 100% legit.

• Affiliate Programs - means send their links and ask people to visit and register. If they do register or purchase after they go to X site that you referred, you get money! Simple? -- Your options can be affiliate programmes at Amazon.com, Clixsense , Qadabra, 110mb.com, etc --those are the legit ones anyway

Any Problems? Want to know if the site you are visiting or  sharing links for, is legit or not? Just drop a comment and I will answer. You can also follow me by email, facebook, twitter, RSS feeds, in your blog, or send me messages easily. 

Just see the right side

( see That >>> side of this page, you will see a bunch of links and options)

Please do share this article on social networks, so that many more people wont be fooled, & much more will be benefited!! 

COMMENTS:

Read more ...

Don't Waste Time on these Scams, Use LEGIT / LEGAL alternatives!! ^_^

Don't waste your time and effort just to post/share to earn. Even a LEGAL and TRUSTED income generating site: Clixsense has ONLY $0.01/ad clicking. Same with other LEGAL sites. Quite surprised?

If you will see my previous post about  Cash4visits: Another Yet Fake Site, they both have likely  the same flow and design but they differ in revenue. Like Signup bonus, per unique visit and minimum payout. Thus, I asked myself, is the owner/web developer ONE person both two sites?

Some similar Sites that are PURE SCAM:
Cash4visits - Cash4visits: [Review]
StartYourPay - StartYourPay
Pay4users - Pay4users
DataEntryJobs - DataEntryJobs
Twodollarclick - Twodollarclick
Google Genius - Its a facebook scam event!! - Google Genius [Reviews]

SEE A LIST OF 100% LEGAL / LEGIT  "Sites that pay you" by clicking here! 

• Any Problems? Want to know if the site you are sharing links for, is legit or not? Just drop a comment and I will answer. You can also follow me by email, facebook, twitter, RSS feeds, in your blog, or send me messages easily. 
• Just see that left side
  ( see That <<< side of this page, you will see a bunch of links and options)
  

  Please do share this article on social networks, so that many more people wont be fooled, & much more will be benefited! 

COMMENTS:

Read more ...

VisitProfit.com -- Scam Site Alert!!

If you've landed on this page, you probably must have got a link from your friend or family on social networks like facebook, claiming that you can earn money online easily just by getting your link clicked by others. The link would have been something like- http://visitprofit.com/?ref=xxxx. The thing is the person who sent you the link wants you to register on the site so that he can 'earn' a commission of $1 for each member he gets registered via his link bearing the referral id xxxx.

I myself was very annoyed when my facebook newsfeed was filled with such links. So I decided to do a bit of investigation and conclude once and for all whether visitprofit.com is a legit way to make money online or just a scam.

• Firstly, the site is very new. It was started by late May 2013, yet the site says it's a large scale company started in 2010.

Below is the entore information of the site from whois.net.

Registration Service Provided By: Namecheap.com    Contact: support@namecheap.com
Visit: http://namecheap.com    Registered through: eNom, Inc.    Domain name: visitprofit.com
Registrant Contact:WhoisGuard     WhoisGuard Protected ()
Fax:
WhoisGuard Protected ()
Fax:WhoisGuard Protected ()
Fax:11400 W. Olympic Blvd. Suite 200Los Angeles, CA 90064US
Administrative Contact:WhoisGuardWhoisGuard Protected (93ce4adb7c3849daa1d6a378b5bad4e3.protect@whoisguard.com)+1.6613102107Fax: +1.661310210711400 W. Olympic Blvd. Suite 200Los Angeles, CA 90064US   Technical Contact:WhoisGuardWhoisGuard Protected (93ce4adb7c3849daa1d6a378b5bad4e3.protect@whoisguard.com)+1.6613102107Fax: +1.661310210711400 W. Olympic Blvd. Suite 200Los Angeles, CA 90064US
Status: Locked        Name Servers:ns1.starfish.arvixe.comns2.starfish.arvixe.com

Creation date: 10 May 2013 08:59:00
Expiration date: 10 May 2014 00:59:00
Pay close attention to the above two lines. Weird isn't it? Specially since they have claimed to work since 2010? Sounds fishy people?

• There isn't a feature to stop automated robots from spamming or registering in the site. I mean CAPTCHA, like other secure sites. Pretty  amateur  for a 'large scale company' don't you think?

• Visitprofit.com does not have Secure http (https). Hence the site can be easily hacked. 

• Fake testimonials - The site says, David earns $2000 per month working from home and provides a link to read the entire story of David. When you click on the link, what actually happens is, you are re-directed to a ad.fly advertisement network. So whenever curious people like you and I click on the link, visitprofit earns some money. It must be making thousands od dollars from the fake testimonials alone. So, the testimonial must definitely be fake. 

• No TOS (Terms Of Service/Agreement). Which means who have no control/rights whatsoever. Whatever visitprofit does is their wish. Suppose they cheat, you can't argue with them. 

After reading all this, anyone with a little bit of common sense can easily say that

Visitprofit.com is a 100% Scam.

This is actually a very wide network of scam. This must be the work of a single group that makes different fake sites to attract people to be trapped in this annoying scam. I have posted names of some similar site earlier but still this is the list I have found so far!
100% SCAM SITES LIST:
Cash4visits - Cash4visits: [Review]
StartYourPay - StartYourPay
Pay4users - Pay4users
DataEntryJobs - DataEntryJobs
Twodollarclick - Twodollarclick
Google Genius - Its a facebook scam event!! - Google Genius Reviews!

Yes, All these are Scam Sites People!!
Please do share this article on social networks, so that many more people wont be fooled!!

COMMENTS:

Read more ...

Common LAN setup problem!!

This post has been written on the request of a visitor. You can also share your problem in our comments page. I will be happy to solve them for you for FREE! ^_^

Sometimes, even simple LAN settings can cause connections error. You get error like "LAN cable is disconnected", "Cannot connect to the Internet" , etc It happens in some windows updates, or when you format and install a fresh copy of Operating System.

How to solve it?

[follow image description below this, if you have problems]

1. Click on Start Button.
2. Go to Control Panel.
3. Select "Network and Sharing Center".
4. Now on the right pane, click on the option "Change Adapter Settings".
5. Select the adapter with "Disconnected" icon . (hint: It has a red cross(x) mark)
6. Right Click the Adapter Setting Panel and select "properties".
7. An adapter properties dialog box will open, select "Configure".
8. On the next dialog box, goto "Advanced" and select "Speed & Duplex" , then select "10 Mb Half"
    [Selecting "Auto" also works but selecting "10Mb Half" will surely work!]
9. After changing the setting, click on "OK" button of the dialog box.
10. There you go, yo have successfully setup your LAN.

Screenshot Tutorial:
Select "Network and Sharing Center".


 Now on the right pane, click on the option "Change Adapter Settings".


Right Click the Adapter Setting Panel and select "properties".


An adapter properties dialog box will open, select "Configure".



On the next dialog box, goto "Advanced" and select "Speed & Duplex" , then click on the dropdown list of "Value".

Now select "10 Mb Half"
    [Selecting "Auto" also works but selecting "10Mb Half" will surely work!]

Then click on "OK" . Now you are good to go! ^_^

How does this work?

Sometimes the speed provided by your router or ISP , and the speed settings in the computer for the connection does not match. Generally selecting "Auto" in the last step given above should have worked but when you get a windows update, the settings can change automatically to receive the highest amount of bandwidth. (ie. 100Mbps) in a general connection with a standard NIC. But if the speed provided by your ISP is really very slow, or your NIC or router itself does not support that speed, then the connection can be interrupted!
Imagine pouring water drop by drop in a small jar and a bucket. We can see that the small jar fills faster. You can use this analogy in LAN connections too. If you have set the settings to very high(100Mbps duplex) , it will be impossible to make a connection easily. So, you should select 10Mbps half (which means 10Mbps simplex).

Additional information: What is duplex & simplex?

A simplex connection is one where the data packets can be either sent or received at one instance.
 i.e. Upload and Download cannot be done simultaneously.

A duplex connection is one where Upload and Download can be done at the same time without affecting the other.

Most DSL connections are not duplex. Broadband connections are generally duplex.

COMMENTS:

Read more ...

How to bypass minimum system requirements?

The problem is REALLY not as difficult as it sounds. You just have to know how to fix it.

Have you ever faced a problem scenario where you have 1Gb RAM ans your software needs 2Gb RAM? You've downloaded it (the software) but you can't install it anymore, because there are error messages like:

• Your hardware specifications don't match

• This computer has insufficient RAM

• This computer does not support this software

• Installation error, cannot install

You have had this problem before, haven't you? Do you know why they arise? These are warning messages that pop-up when ever the detected specification does not match. It does not necessarily mean that the software would not have worked in your computer. So how do you bypass it?

Bypassing annoying error message pop-ups!

As complex a program is, it is ultimately made by humans. So they are not 100% free from errors. Sometimes even when the specifications match, an unexpected error message shows up - "Installation will abort", "Cannot open this file", "Cannot download patch" are common examples. It could mean that your installation is corrupt or your [.msi] file has some error while checking system. 
You can bypass it easily with a tool called "ORCA"

What is ORCA?

Orca MSI Editor allows you to edit the properties of any MSI file. With this tool, you can change the title and text within the installer an look at how and where the files are delivered. 
Orca.exe was a executable tool found in earlier versions of windows. It was created to bypass these problems. Unfortunately they removed it for the current versions of windows. But you can still find it if you want to download.

Downloading ORCA:


[Download ORCA by clicking here!!] 
*no survey! *just 30 second waiting time

Image Screenshot: Follow this instruction if you have problems!

Alternate Download:
Download Link here!! 
*small survey here! *Invalid for Asian Users

Orca: This tool used to be a part of Microsoft Developer Tools but is now retired and no longer supported by the company. Use it at your own risk. 

COMMENTS:

Read more ...

Cool Facebook Trick -- Impress your friends!

Today I am going to show you an awesome facebook trick. Get ready to impress your friends! :D

It seems this trick is no longer working , after facebook upgraded recently!

For another cool facebook trick, click here!

Trick: Brief and Easy Method : Follow simple steps below!

1.Log in facebook with your PC (ie. Computer)
2.Go to your facebook profile.
3. Type this message:

I love this person! This person is totally awesome!!
& this person is my best friend - @@[1:[0:1: Click here to see that person ]]

4. After you type this, post this status.

5. Then you will see "blue text" on your status.

What happens now?

Whenever anyone sees this status and clicks on the blue "Click me", they will be redirected(sent) to their own facebook profile. This way they think that you thought highly of them. You can also expect a hail of likes and comments :P

This is just a prank! You can also replace the message with this!

This person is the worst! - A total lunatic idiot - @@[1:[0:1: Click here to see that person ]]

The possibilies are many, you can use it however you want :D
Enjoy! ^_^

Note: This trick will not work for mobile devices because facebook links like this, is not supported in most mobile devices. It works like a charm in Computers though! 

It seems this trick is no longer working , after facebook upgraded recently!

For another cool facebook trick, click here!


COMMENTS:

Read more ...

Video Problems?

Sometimes you get the error "File failed to open" or "Could not recognize file format" when you open a video file, don't you?

Well that doesn't always mean that your video player is broken. It could mean that there is lack of codecs in your computer. Codecs are definition of video and audio format that the video player use to play video. For example - If your computer does not have .mkv codec, it wont be able to play .mkv video (matroska videos) which is quickly becoming a popular file format due to its small size and high quality.

Codecs are basically a dictionary for computers. If they dont know a video, they will look it up in the 'dictionary'. If the word is not in the dictionary, it is obvious that you wont find out the meaning easily. Therefore, to solve this problem, correct codec should be installed.




What are correct codecs? What is best for me?

Well if you cannot determine correct codecs, why not take them all? This way, if you get a new video, you wont have to update the codecs frequently. You should download a Mega Codec Pack. I recommend K-Lite beause:
-First, it is FREE - I like! :P
- Second it is the fastest - consumes very low memory and space :D
- Most efficient
- Largest database

How do I download?

Oh, don't worry about minor details. You just click on the links below:

Click me to Download K-Lite Codec Pack 9.9.5 FULL
If you have problems, you can also try,
Download Mirror1
Download Mirror2
Download Mirror3

Click on "Skip Ad" when this appears, then download will start automatically. Thanks! ^_^

Other Versions of the Download that you may Like:
Click me to Download K-Lite Codec Pack 9.9.5 STANDARD

Click me to Download K-Lite Codec Pack 9.9.5 BASIC

Check out the latest updates  here :: Click me to check Latest Updates!

COMMENTS:

Read more ...

How to Turn Your Laptop Into JARVIS From Iron Man !

Turn Your Laptop Into J.A.R.V.I.S From Iron Man.

Turn your laptop into super smart Jarvis in 15 Minutes :

You have probably heard about the Iron Man Personal Assistant, aka J.A.R.V.I.S, you would have wondered if you could convert your laptop/desktop into a full featured robotic assistant,you could do it.And it is pretty easy. Although you might not be able to launch missiles and deploy security armor, you can do easy tasks like asking for weather, shutting PC down, pimp its interface etc etc...

So Lets Get It Started,What Do You Need :

• # Windows 7 or 8 ( 7 is just great, 8 will work, vista & XP will not work )
• # Windows Speech Recognition Macros. https://dl.dropbox.com/u/2362886/WSRMacros.msi
• # A Bluetooth/Wireless Headset With Mic (optional) or a Laptop
• # JARVIS Theme. (read below)

So That You Don't Get Confused :

We have divided the "convert-to-jarvis" mission into 3 Divisions :
- Training The Windows Speech Recognition Program.
- Setting Up The Windows Speech Macros.
- Setting Up The J.A.R.V.I.S Interface.

Step One : Train Your Windows Speech Recognition Program : 5 Minutes :

Yeah I Know, A Basic Step, But The Most Important part of "convert-to-jarvis" mission, what you gotta do is fire up the windows speech recognition program, which comes pre-installed with the Windows, way to access it is via start bar. Now choose the required Fields,and after it is done, visit the "Train your computer to better understand you" section, it is not necessary for people with clear voice/accent, but I strongly advise you to spend at least 5 Minutes on this so your computer can understand you better.

Step Two : Setting Up The Windows Speech Recognition Macros : 5 Minutes :

Now if you Have set-up-ed the Windows Speech Recog Program, you would have been trying out all sorts of cool commands, But now to spice it up, We'll use the Windows Speech Macros.I assume you would have already downloaded it from the link above and installed it.After Installing it i would advise you to put its shortcuts in two places, One in the desktop and other in the start-up folder, so it would start the second your computer boots up.So a little walk through to this software, This is a super-cool, little software that teaches your computer to talk to you interactively.Here is how to set up the commands :
Double Click The Macros Icon, and when the window pops up asking "What should the macro do?" click "Advanced." For those of you familiar with creating websites, this should be a welcome site. WSRM uses XML for commands... which makes creating custom commands relatively simple. For those of you who aren't aware of XML, it's still easy.Here Is A Little Sypnosis at what are you looking at :

<speechMacros> - This is the starting Tag, it just tells the computer that this XML file uses the Speech Macros to execute.

<command> - This is the command to be executed. Each command is basically one action... in most cases you will only need one, but for some automations you'll want to include more than one. You'll see an example of this later.

<listenFor></listenFor> - This tells the computer what word or phrase to listen for in order to do an action. Notice that there is a closing tag (</listenFor>), this tells the XML that this spot in the code is where to stop doing whatever function... in this case stop listening for a word or phrase once the computer hears it.

</command> - The closing tag for the "Command" tag... again, in XML every tag will have an opening/closing tag and what happens between the two is how it knows what to execute. In this case it knows that the command is finished once the word/phrase has been detected.

</speechMacros> - By now I think you can figure out why this is here.

Since I'm going to name my computer Jarvis, I'm going to tell my computer to listen for it's name by changing the <listenFor> tags to say the following : <listenFor>Jarvis</listenFor>

Here Is A Little Applet That will teach my laptop to Reply Me :
_________________________________________________________________________________
<speechMacros>
<command>
<listenFor>Wake Up Jarvis</listenFor>
<speak>Systems Online, Database Check, Good Morning Sir !</speak>
</command>
</speechMacros>
_________________________________________________________________________________

So Whenever I Say "Hey Jarvis" My Computer will reply me with "System Online,Database Check, Good Morning Sir ! ", You can change it to whatever you like !

An Speech Macro For Getting The Weather :
_________________________________________________________________________________

<?xml version="1.0" encoding="UTF-16"?>
<speechMacros>
<command>
<listenFor>Pull up the weather in [CityName]</listenFor>
<run command="http://www.weather.com/weather/local/%7B[CityName.zipCode]%7D"/>
</command>
<command>
<listenFor>Is it cold in [CityName]?</listenFor>
<speak>Let me check... just a moment.</speak>
<script language="JScript">
<![CDATA[
<var xml_doc = new ActiveXObject("Microsoft.XMLDOM");
<xml_doc.async = false;
<xml_doc.load("http://www.rssweather.com/zipcode/%7B[zipCode]%7D/rss.php");
<var titles = xml_doc.getElementsByTagName("title");
<var descriptions = xml_doc.getElementsByTagName("description");
<Application.Speak(titles.item(2).text + " in {[*CityName]}");
<Application.Speak(descriptions.item(2).text);]]>
</script>
</command>
<listenForList name="CityName" propname="zipCode">
<item propval="65201">Columbia</item>
<item propval="37201">Nashville</item>
</listenForList>
</speechMacros>
_________________________________________________________________________________

A Macro To Restart The Computer :
You will just have to say "Nuke It!" and the computer will restart :
_________________________________________________________________________________

<speechMacros>
<command>
<listenFor>Nuke it</listenFor>
<speak>Rebooting The System.</speak>
<run command="C:\Windows\System32\shutdown.exe" params="-r -t 00"/>
</command>
</speechMacros>
_________________________________________________________________________________

Another One To Shut Down The Computer :
You will have to say "Goodbye Jarvis" And the Pc Will Shut Down :
_________________________________________________________________________________

<speechMacros>
<command>
<listenFor>GoodBye Jarvis !</listenFor>
<speak>Getting Offline,Bye Sir</speak>
<run command="C:\Windows\System32\shutdown.exe" params="-s -t 00"/>
</command>
</speechMacros>
_________________________________________________________________________________

Download This Pretty Little App And Extract It To C:\NIR\ and you will add more intelligence to your PC :

Volume Up:

<speechMacros>
<command>
<listenFor>volume up</listenFor>
<run command="C:\nir\nircmd.exe" params="changesysvolume +5000"/>
<speak>Volume Up</speak>
</command>
</speechMacros>
_________________________________________________________________________________

Volume Down:

<speechMacros>
<command>
<listenFor>volume down</listenFor>
<run command="C:\nir\nircmd.exe" params="changesysvolume -5000"/>
<speak>Volume Down</speak>
</command>
</speechMacros>
_________________________________________________________________________________

Volume Medium :

<speechMacros>
<command>
<listenFor>volume medium</listenFor>
<run command="C:\nir\nircmd.exe" params="setsysvolume 30000"/>
<speak>Volume at medium listening level</speak>
</command>
</speechMacros>
_________________________________________________________________________________

For More Interactivity, install Voice Search on Google chrome or some similar app in firefox !

Step Three : Pimping The Interface : 5 Minutes :

So well we have completed the talking and replying part, but we don't need the old crappy windows desktop, we need a kick ass interactive desktop so our computer looks like jarvis, to do that we will install this theme from Devianart.

http://hell999.deviantart.com/art/IronMan-Jarvis-Theme-Download-259211144

After that we will need to pimp up the start of windows, to do that we will download this little utility called Bootchanger

http://hell999.deviantart.com/art/IronMan-Jarvis-Theme-Download-259211144

and getting a boot screen animation of your choice form here

http://windows7bootscreens.com/

then you are done.

Welcome To Jarvis !

So Whats Next ? We think using RFID's tags and attaching CCTV's cameras to it. We could also connect arduino and sub computers to control lightning and other electronics component, We could also add a IR Receiver to add remote functionality ! What do you think we could do next ?

Drop your comments below please; You feedback can lead to bigger & better posts  ^_^

COMMENTS:

Read more ...

Awesome Offers for your own FREE webpage!!! -- Must Read :D

Ever thought of creating your own webpage?

Well a VERY good offer is up via. 110mb.com
You wouldn't want to miss this, guaranteed!

110mb.com is a FREE webhosting site. It can give you upto 100Mbit dedicated server for your FREE website. You can also upgrade to PREMIUM account for a VERY LOW COST, to get Unlimited Space and Bandwidth ^_^

>>>before reading this section, you might want to click this TEXT to see what other FREE webhosting offers are available<<< [Currently, this link is dead, will update in a few hours]

CHECKOUT THESE AWESOME OFFERS!! (Most are FREE ^_^  !!!)

>>>>110mb Official Homepage<<<<
.
Very Cool Offers here!! : See by clicking link below :
.
>>>>Premium Website<<<<

>>>>Know the Difference? FREE vs. Premium<<<<

>>>>About 110.com<<<<


If the above selection was useful to you, please SHARE this page
Leave a comment below ~Thanks~
.
If you want more cool offers, mention which kind -- I will help you gladly :D

.

COMMENTS:

Read more ...